S50 8mm Miniature Optical Encoder With Radial Cable Outlet

S50 sensor Incremental encoder shaft 8mm up to 23040ppr

Items	Basic parameters
Brand	HENGXIANG
Encoder type	Incremental encoder
External diameter	50mm
Thickness	30mm
Shaft length	16mm
Solid Shaft diameter	8mm(D shape)
Resolution	50;60;100;200;250;256;300;360;450;500;512;600;
	720;800;900;1000;1024;1200;1250;1440;2000;2048;2500;
	2880;3000;3600;4096;5000;5760;8192;10000;11520;16384;20000;23040
Output phase	Phase A+,B+,Z+ A- B- Z-
Supply voltage	DC5V ; DC8-30V
Outlettype	Cable out from side
	Cable out from back
	Socket out from back
Output mode	NPN&PNP
	Voltage output
	Push-pull output
	Difference output(TTL,HTL,RS422)
Environmental temperature	Operating temperature: -20~+90° (Non icing)
	Storage temperature: -25~+100° (Non icing)
Environmental humanity	Operating and storage: 35~85%RH (non-condensing)
Protection grade	IP50 ; IP65
Cable length	1M (cable length could be added appropriately by
	require, but it need payment individually)
Consumption current	100mA MAX
Top response frenquency	300KHZ
Allowable ripple	≤3%rms
Load Voltage	≤DC30V
starting torque	less than 5X10-3 N.m
Intertia moment	less than 3x 10-6kg.m2
Shaft load	Radial 40N; Axial 20N
Top REV	5000RPM ;IP65≤3000r rpm
Environmental temperature	Operating:-20 ～+90°；storage:-25 ～+100°
Enviromental humidity	Operating and storage: 35-85%RH(noncondensing)
Vibration(endure)	Amplitude 0.75mm,5-55Hz,2 hours for three axis individually
Sock(endure)	490m/s2 ,11 ms three times for X,Y,Z direction individually
Shaft Material	Stainless steel
Shell Material	Dia cast aluminium
GND	not connect to encoder
Cable length	1000mm(cable with shielding)
Certification	CE
package	Carton box
Net weight	About 190g (with package)

Principle of encoder
An incremental rotary encoder outputs a certain amount of Pulses per Revolution. The higher this PPR number, the smaller the angle between each pulse. This PPR number is fixed for ordinary incremental encoders. Programmable incremental encoders can adjust this value to a desired number by a software change.
Today most incremental encoders have a Push-Pull (HTL) or RS422 (TTL) output driver, these have replaced most of the older output circuits like Open Collector NPN, Open Collector PNP, Voltage Output.
Push-Pull (HTL) circuits, also known as Totem Pole, provide a signal level which corresponds to the applied supply voltage. The supply voltage typically ranges from 8 to 30 VDC.
With proper connections you can use the Push Pull interface to replace true open collector circuits by using an external diode connected in a way to limit the direction of the current for RS422 (TTL) circuits provide a constant 5 V signal level that is not dependent on the supply voltage. Two supply voltage ranges can be selected: From 4.75 to 5.5 VDC (can be used to replace open collector output drivers) or from 8 to 30 VDC. Using differential signals the output fully complies to the RS422 standard.
Production date
1. for 1-10 samples: 3-5 working days
2. for 20-50 mass production: 7-10 working days
3. for over 100pcs, production will be discussed with customers and ship on time
Payment terms:
1. T/T, western union, credit card, Paypal, etc
2. 3-5 working days after payment received
3. Encoders will be shipped once ready
Shipment
Goods can shipped via TNT, FedEx, UPS, DHL, EMS, etc.
You could select the express according to your requirements if freight collector
If you do not have any courier account, we will check and find a cheapest and safety express for you.
Our factory has 30% discount with most courier company, so price could be as cheap as possible.

More information
If you are looking for more information about our factory or about our products, please contact us or email us right now, we will reply you as soon as possible.

S50 miniature optical encoder

8mm miniature optical encoder

Radial cable small rotary encoder

S50 8mm Miniature Optical Encoder With Radial Cable Outlet Images